Flooring tile flooring and panels

Mosaic parquet is much easier to lay than that piece, but the requirements for strength and flatness of the base is on the increase. Inlaid parquet has Tipuntovogo compound and substrate unevenness will cause unacceptable levels of differences of adjacent slats. Therefore, the unevenness of ties should not exceed 1 mm in the two-meter interval. Shields can be placed upright (parallel side walls) or in expanded diagonal position. Adjacent plates are placed so that the direction of bars were perpendicular. In direct flooring laying plan is not necessary - it leads from the corner farthest from the entrance. Fig. 24 digits show the sequence of stacking panels (along the two cords forming a right angle). Mosaic parquet laid two workers. One worker prepares and submits material, tray, pours cold mastic and leveled it with a comb. Second business, higher education, puts the first guard in the corner and utaplivaet it in a layer of mastic. Subsequent plates tightly 'packed and pressed to the base. Paper with flaps removed after 3-5 days, as the adhesive hardens. Very beautiful mosaic parquet flooring, laid deployed squares with a light vein. Panelboard parquet laid on wooden sleepers antiseptirovannym on nails. Laghi thickness of 25 or 40 ALM laid in parallel rows along the long axis of the room every 400 mm, so that each full board relied on the joists on the edges and the middle part, and half board - at the edges. The first shield is placed in the corner farthest from the entrance, two cords, and fastened with nails to each lag (hammer nails obliquely to the bottom groove cheek). Nail heads utaplivayut doboynikom. Boards with grooves on the band loose spikes (three spines on each edge). Laying method are "themselves" - for the door.