Plastic window. Advantages over other products.

Windows. Benefits to the products made from similar material. In the production of window units worldwide implementation of new technologies of construction materials to improve thermal properties of windows, as well as to prolong their life cycle, which is important for the consumer. Polyester fiberglass - this is a fundamentally new design profiles. The technology of glass has been developed in Canada. For a long time for this technology to produce items for the defense industry, where the materials used (fayberglass-composite (PGA)) increased demands on the strength properties, thermal conductivity, resistance to environmental effects, durability and environmental friendliness. The main problem in applying the fiberglass has been linked to lack of technologies to produce from it profiles the desired configuration. Produce profiles of any configuration is possible with the introduction of production technology of pultrusion. The process is pulling through a heated spinneret fiberglass material impregnated with thermosetting resin. The output is a finished product - window profile. Fiberglass window units are used in residential and commercial buildings in the manufacture of commercial pavilions, balconies, porches, etc. Often used in the reconstruction and restoration of buildings of historical and cultural value. During the thermal tests showed that thermal resistance of windows and doors with bindings made of fiberglass, depending on the design and glass, matches, and sometimes even exceeds the heat transfer of a tree. Fiberglass windows, glazed mono-glazed windows provide insulation from the external urban transport and extraneous ambient noise. Certification testing of GRP profiles have shown that in terms of tensile strength and modulus of elasticity of fiberglass surpasses similar materials for the manufacture of profiles in 8 times, the shock stability in 20 times the size of diformatsii 7 times. On top of fiberglass is durable because does not rust, rot, does not change color, it does not form shells, no scratches and still it does not become brittle. The strength of fiberglass makes it possible to increase the area of ??glass. Due to the similar densities of glass and glass as a result of various external (including natural) influences the deformation structures are formed from this material, except in cases of physical pressure on them.