Replacement of faulty switches and sockets.

Before removing the switch to turn off the power - to turn out the plug or turn off the breaker. Then remove the lid switch, to release from the terminals ends of the wires and unscrew the screw or screws fastening the case. If the switch is more than two inputs, then their removal should be marked, for example, pieces of colored electrical tape, and memorize or write down the position of inputs. Before installing a new switch should be checked Standing wires. It often happens that the loops come to life, ribs broken wires, insulation and dry valilas. We must clean up the wires, cutting off the charred and nadlomannye sites do and zaludit loops and then really put the new switch. Worthless socket replaced in exactly the same as the switch. Some sockets have an internal fuse - a thin wire. These outlets are very practical, since the short-circuit does not turn off voltage wiring throughout the apartment, but fails, only the socket, which included a faulty electrical appliance. If the power outlet fuse blows, instead you can install a copper wire-hairs of a flexible wire or cord, which will ensure the work of domestic appliance.