Pasting the door.

Door leaves and frames can also decorate the film and rolled materials. You can use ordinary paper and wallpaper, which are plastered on walls of rooms, but it is better for this purpose, suitable groundless and self-adhesive film, the film on a fabric or paper-based and vinisten. They are less polluting and more resistant to damage. In recent years, especially popular for pasting door in the hallway, bathroom, toilet and kitchen enjoys penoplen. But it is only appropriate for the lobby and corridors. Gluing door leaf should be removed from its hinges, remove the handles, and latches kljucheviny and put on two stools. Surface sanded sanded, carefully remove dust with a damp sponge, soil and paste over convoys in the sequence described above for the respective film and roll materials. Groundless, self-adhesive film, cut to size before gluing to rolled up and to deploy them in the process of gluing, rolling on the canvas. First, you need to separate the backing paper and attach it to one edge of the blade, and roll out roll, gradually separating the backing paper and smoothing out the film with a soft brush or cloth. Thin film materials should stick with the call for the edge of the door leaf, and after the glue has dried carefully cut with a sharp knife or razor blade around the perimeter. When the edge of the door leaf zaovaleny difficult to precisely cut the tape around the perimeter, in some places (it might not stick. In such cases, the contour of the door leaf at a distance of 20-30 mm from the edge of making the groove depth and width of 4 to 6 mm. Film pre-cut and the width equal to the distance between the outer edges of the groove. After gluing the edge of the film utaplivayut in the groove, which then stick to the glue polyvinyl kloridny or nylon harness. For this purpose, you can also use plastic or wooden furniture naschelniki reechku. In this case, you must provide groove respective sizes. laminating vinyl leather, or vinistenom penoplenom considerable thickness ends of the door leaf can cover the wooden plates, straps or U-shaped plates. To this end, the canvas should be cut down and sostrogat planers around the perimeter of the thickness of the lining or layouts. When pasting special trims challenge is cutting the material to fit his view of the figure, as well as zaovalennoy form casings.