At first glance, it seems that the brickwork is done very simply and in a short time. This is not true, there are many tricks and wizardry to the correct bricklaying. First, we must pay attention to the quality of the material, bricks must be smooth, without cracks and large pores. This brick will last a long time, and decorative brickwork and will look good. Secondly, we should determine the bricks for the construction and finishing, it can be different brand bricks, or to finish takes decorative brick. If you do not reinforced masonry, it is necessary to choose the right layout scheme brick, given the desired thickness of the walls. If you have conceived reinforced masonry, it is necessary to comply with the following requirements: the thickness of the seams for reinforcement shall not exceed the diameter of the valve in less than 4 mm, with mesh reinforcement rod ends should serve at 2-3 mm from the joints of masonry to control the stacking fixture. The thickness of the reinforcement bars for masonry ranges from 3 mm to 8 mm. And it must be remembered that the use of single rods reinforcement for masonry is unacceptable. To finish facade of the house, you can use any brick, most commonly used decorative bricks with beveled or curved edges, which can be decorated with arches and columns.
No comments:
Post a Comment