Friday, June 17, 2011

Wrapping cloth.

Special beauty, comfort room attached to walls, floors covered with cloth. To apply the finishing linen and cotton fabrics, burlap. Attach the fabric to the wall can be, except for sticking, and also with slats or frames. Adhered fabric surface of the walls is necessary to prepare the way for pasting self-adhesive films: it must be absolutely smooth, well proshiatlevannoy. Pasting the cloth on the walls of the best adhesive on CMC, mastics "Bustilat" and "Gumilaks, casein glue and flour paste. Due to the fact that the fabric when wet and drying can provide a strong contraction, it must first check on a separate piece. For this piece of cloth should be wet and dry. If it turns out that the fabric sits down heavily, it must be all wet and dry (this process is called dekotirovaniem). With a small shrinkage of the fabric can be used without soaking: a small shrinkage will contribute to a better stretching it to the surface. First, cover the walls with a thin layer of glue, then placing the fabric back to back and smooth it with a brush. Botox produces "herringbone" - the top of the middle leaf to the edges, all the while controlling the junction with the adjacent blade. As we know, the walls covered with cloth, is going to a lot of dust, so they should be regularly vacuumed. Therefore it is better immediately after the stickers and dry cloth to cover a thin polymer film. In this case the tissue are much longer. To cover the fabric of the polymer film it is sprayed with a solution perchlorvinyl resin in acetone (50-75 g of resin per 1 liter of acetone) or with varnish. A solution in a glass or enamel bowl, stirring with a spatula or wooden stick. The solution was applied with a sprayer. Floors are used for pasting a denser fabric, take the floors have to be very flat and smooth. To do this zashpatlevat in the floors of all the cracks. For this purpose the coating, which is made at home. Take the wood dust or sawdust melkoproseyannye added thereto nitrocellulose lacquer, the dispersion of PVA or water glass (silicate stationery glue) and knead until the consistency of liquid cream. Then, this mixture of close up the seams or cracks in the floor. After drying, place zashpatlevannye polished sanded, then the first medium-fine. Filling If you can not get a flat surface on the floor you can lay a sheet of solid wood-fiber boards, carefully matching the edges. The fabric can be installed directly on the linoleum or chipboard. Before the flooring should be removed the baseboards, then expanded raskroennye linen cloth on the floor and each carefully stretch, smooth and nail small nails, paying special attention to fit the picture. Then cover the fabric paint. Can use a special parquet lacquer (without acid curing agent). Varnish is applied by foam rubber cushion with three layers, each of which must be completely dry. After that, nail the baseboards, they also paint and varnish. Paul got very beautiful, it is not necessary to lay the carpet. Paul is not electrified.

No comments:

Post a Comment