How to hammer a nail

Sheet of plywood or steel plate not only ensures that the surface details of a random attack it with a hammer, but will also guide for trying to drive a nail. Careful driving nails sheet of plywood or steel plate not only ensures that the surface details of a random attack it with a hammer, but will also guide for trying to drive a nail. A nail in a remote place hammer a nail in a remote place not be easy if we use the simple device as a bolt and nut on the end. Driving nails into spring-loaded bar is not easy to hammer a nail into a wooden spring-loaded bar that can not prop up the bottom. The situation is easier if instead of a hammer to use a clamp and used it to push the nail into the plank. Driving nails without cracking hammering nails into the edge of the board, pre-seal the timber in place of his driving, slightly deepening punch hammer blows. This prevents the board from cracking. Strong connection to the connection to get lasting, nail must be of sufficient length and include in the design, which is nailed to at least one-third. In order to give greater rigidity cobble together planks nails pierce at an angle to each other. In moist wood nail hammer is easier than in the dry, as the elasticity of wet wood decreased. In a dense wood nail goes bad bends. To beat him and that he was not bent, it must hold the pliers in the middle. remontiruem.ru